Request a Quote

Give us a call today or click here
for a free quote

717.656.0513

339 Monterey Rd.,
Bird In Hand, PA 17505

Commercial Garage Doors PA

Commercial Overhead Doors

Non-insulated Ribbed

Lexus 175 Series
The Lexus series of doors is specifically designed for commercial and industrial applications. We use only the highest quality materials. Steel panels are manufactured to strict tolerances on a fully-automated continuous foamed-in-place line. This results in a durable, clean and consistent finished product, which offers exceptional value.



KEY FEATURES AND BENEFITS

  • Polyurethane foam insulation provides a high R-Value of 16.3 and is environmentally safe and friendly.
  • Consistent foam density and foam/steel adhesion with a 95%+ closed cell ratio ensures panel is free of voids or deterioration over time resulting in superior panel strength and optimum insulating efficiency year in and year out.
  • Chemically bonded and sealed thermal break-Maximizes door insulating efficiency by preventing heat transfer or panel retention of air or moisture.
  • Panels are dimensionally stable at all temperatures, unaffected by extreme climate conditions.
  • Corrosion resistant G60 hot-dipped galvanized steel skins with baked-on primer (.02mil) and top finish coat (.07 mil) of polyester paint. Clean appearance inside and out yet durable for long term protection against rust and the harshest environments.
  • Tongue and groove joint design with dual-in weather seal- prevents air, rain, ice and snow infiltration when door is closed.
  • Exclusive continuous double steel reinforcement hinge straps permit the use of industry standard “full” hinges.

OPTIONS

  • Insulated glass lites in two sizes
  • Full view aluminum frame sections in white, with glazing options that include DSB, insulated glass, or tempered glass.
  • Special glazing available (consult factory)
  • Exterior operated cylinder lock or inside slide lock
  • Exhaust ports in multiple sizes
  • Reinforcing for draw bar operator
  • Top seal
  • Extra-long life torsion springs

Full- View Aluminum

Full-View Aluminum Door
Built to withstand rigorous use in a busy service center, yet offering a clean, contemporary look for many types of architectural applications, our Full-View Aluminum Door is an attractive choice when natural light and open visibility are important.



  • Ideal for maximizing benefits of high visibility and natural light

  • Lightweight but extremely rugged construction

  • Virtually maintenance-free, even in harsh environments

  • Wide range of finish colors and glazing options

  • Substantial solar heat gain

Options

  • Frames
    • Standard finishes are clear anodized, factory pre-painted white, or bronze anodized

    • Custom colors are powder coated using a selection of 188 stock RAL colors (RALcolor.com)

  • Glazing
    • Custom colors are powder coated using a selection of 188 stock RAL colors (RALcolor.com)

    • Glass or acrylic, clear or tinted

    • Single wall or insulated

  • Solid aluminum panel sections — usually for bottom, but can be used for any section

  • Solid insulated 1-3/4” thick urethane sections with stucco embossed steel skins usually for bottom, but can be used for any section

  • Exhaust ports

  • Top seal, jamb seal

  • Extra-long life torsion springs (25M, 50M, 100M)

  • Pass door — 3-1/2 sections high

Appearance

A classic design with unlimited options in configurations, finishes, and glazing materials that combine to create a door that achieves a fresh and modern look.

Strength

Heavy gauge parts, 4-sided extrusions, built-in reinforcing fin, and unique wrap around steel end cap make for a very heavy-duty door.

Durability

Aluminum doors are naturally resistant to the deterioration caused by the elements and are an excellent choice for many environments not suited to wood or steel doors. Built to withstand rigorous use in a busy service center, yet offering a clean, contemporary look for many types of architectural applications, our Full-View Aluminum Door is an attractive choice when natural light and open visibility are important. Typical installations are as diverse as auto service centers, firehouses, club stores, and upscale retail and restaurant locations.

Green Building Benefits

Galvanized steel track shall be 2" or 3" as required. Bracket mounted track is standard for wood jambs, reverse angle mounted track is standard for steel jambs. Vertical track shall be tapered for use with graduated hinges to provide a weather tight closure. Horizontal track shall be reinforced with galvanized angle engineered to door size and weight.

  • Recycled content and recyclable material

  • Visible light transmittance

  • Substantial solar heat gain

  • Cycle life (long-lasting product)

  • Regional manufacturing (less transportation)

  • No on-site finishing required (no VOCs introduced)

Sections are 1-3/4” thick extruded 6053-T5 aluminum with integral reinforcing fin at each intermediate rail; all stiles and rails are 4-sided extrusions, secured with 1/4” diameter bolts.

Available standard as clear anodized, bronze anodized, or factory pre-painted white. Optional custom powder coated or anodized frame finishes are available in a wide variety of choices.

Standard Door: end stiles, top and bottom rail have 3” face; center stiles have 1-1/4” face. Heavy Frame Door: end stiles and bottom rail have 5” or 7” face, depending on size.

Top rail has 5” face and center stiles have 3” face. Shiplap meeting rails with continuous, replaceable dual seals between sections. Bottom section supplied with flexible U-shaped PVC astragal. All glazing and solid panels are completely wrapped in a flexible vinyl channel and held in place with a rigid snap-lock retainer.

Glazing options include (but are not limited to):
1/8” clear DSB (double strength) or tempered glass
1/2” clear insulated glass or tempered insulated glass units
1/8” clear acrylic
1/4” clear polycarbonate (Lexan)
1/4” twin-wall (ribbed) polycarbonate

Solid panel options: Smooth — .050” thick aluminum panels, clear or bronze anodized or pre-painted white. Embossed — .017” aluminum skins laminated to a core of either polystyrene (for insulation) or plywood (for strength).


Non-insulated Ribbed

The 24G Commercial Steel Door
Our 24G door is designed, engineered and manufactured specifically for the rigors of everyday use. This door is built tough with the proven strength of deep ribbed, box girder construction eliminating sag, resisting wind load and reducing impact damage. A strong continuous exterior of galvanized steel provides optimum security, while the double coated, baked enamel finish promises years of low maintenance, good looks and worry-free durability.

The 24G model is a standard weight door and is an excellent value, suitable for almost all installations. The 24 gauge door is available in two colors, white or a very distinctive dark bronze. The 20 gauge door, available in white only, has a 33% thicker steel skin which is stronger and more impact resistant. 20 gauge is recommended for larger doors, or where heavy use is expected.

Window Options

  • 24" x 7" Plexiglass Lites

  • 24" x 7" Double Glazed Plexiglass Lites (for insulated doors)

  • 24" x 8" Insulated Glass Lites (for insulated doors)

  • 20”x12” DSB Glass

  • 40”x12” DSB Glass

  • Full View Aluminum Frame Sections (standard is mill finish, optional painted white)

Features

  • Full 2" thick ribbed door

  • Full 24 gauge heavy duty smooth steel skin

  • G-60 hot dipped galvanized steel

  • Two coat baked-on polyester paint system

  • Welded construction

Options

  • 1-7/16" thick polystyrene insulation with painted steel or vinyl backer

  • Plexiglass or insulated glass lites

  • Full view aluminum frame section in mill finish or white, with glass options that include DSB, insulated glass, or tempered glass

  • Exterior operated cylinder lock

  • Exhaust ports

  • Reinforcing for Draw bar operator

  • Top seal

  • Extra long life torsion springs (25M, 50M, 100M cycle)

  • Wind load package available

Sections

Door sections shall be roll formed steel pan type construction, 2" thick. Sections are formed with shiplap meeting rails for added strength and weather-tight closure. A two point contact resilient weather-strip is attached to the bottom of the door with a continuous retainer. Sections will be furnished with reinforcing struts as required to meet minimum 15 psf wind load (wind speed of 90 MPH). Higher wind load ratings are available where required.

Exterior

The exterior skin shall be G60 rated, hot-dipped galvanized commercial quality steel no less than .023" thick (24GA), with a smooth surface, and be roll formed with two deep reinforcing ribs and four shallow grooves. Factory finish is a two coat baked-on polyester paint system, a minimum of 1.0 mil thick. Specify white or bronze.

Insulation

Insulation and back covers may be furnished as an option. Insulation shall be 1-7/16" expanded polystyrene with an R-value of 7.0. Back covers shall be smooth white steel or a thick white high impact ABS vinyl (specify), with edges recessed into the sections for a safe, clean appearance.

Track

Galvanized steel track shall be 2" or 3" as required. Bracket mounted track is standard for wood jambs, reverse angle mounted track is standard for steel jambs. Vertical track shall be tapered for use with graduated hinges to provide a weather tight closure. Horizontal track shall be reinforced with galvanized angle engineered to door size and weight.

Hardware

All hinges and brackets to be minimum 14GA galvanized steel. All rollers to have 10-ball bearings with casehardened races. Galvanized aircraft type lift cable to have minimum 5:1 safety factor. Counterbalance assembly shall consist of oil tempered torsion springs mounted on a continuous cross header shaft supported by roller bearings, designed for each door to provide a minimum of 10,000 operating cycles. Painted steel or white vinyl cover panel (optional) 1-7/16" polystyrene insulation (optional) Reinforcing retainer angle Heavy duty galvanized steel stiles Rubber bottom weather-strip


Weather BreakerThe Weather Breaker Door
Whether you are keeping the cold out or in, nothing makes better sense for your manufacturing facility or warehouse than the energy-efficient performance of the Weather Breaker 175 by Monterey Door Shop.

The Weather Breaker 175 not only provides a high R-value and airtight seals, it is engineered for quiet, smooth operation and built tough for years of trouble-free service. The 20 gauge door option, available in white flush design only, has an exterior skin that is 85% thicker and is recommended for doors that expect very heavy use, or if extra impact resistance is important.

FEATURES:

  • Insulation value of R=16.4
  • CFC 11 free polyurethane foam core
  • Full 1-3/4" thick
  • 25 gauge embossed exterior skin
  • Thermal break between exterior and interior skins
  • Continuous reinforcing strip for hardware attachment
  • High strength-to-weight ratio

OPTIONS:

  • 20 gauge exterior skin (available only in white, with no ribs)
  • Insulated glass windows in four sizes
  • Exterior operated cylinder lock
  • Exhaust ports
  • Reinforcing for Draw bar operator
  • Black PVC recessed step plate/lift handle
  • Thermal break/friction strip for end caps (with "angle-in" track only)
  • Top seal
  • Extra-long life torsion springs (25M, 50M, and 100M cycle)
  • Pass door – 3-1/2 sections high
  • Wind load package available

Steel Raised Panel Doors

Fire Door
3 Hour approved fire rated (optional 4 Hour) for fire doors and roll up fire shutters in dividing fire walls with openings not exceeding 152 sq. ft. in area. 1.5 Hour approved for metal fire doors in vertical shaft openings not exceeding 152 sq. ft. in area. .75 Hour approved for rolling fire safe doors and interior or exterior fire shutters in corridor or room-partition opening not exceeding 152 sq. ft. in area. 1.5 Hour approved for doors in exterior wall opening not exceeding 152 sq. ft. in area for fire doors.

  • High quality rolling metal fire doors at a competitive price
  • Optional internal flame baffle prevents infiltration through header
  • Approved for roll down stainless steel fire doors
  • Oversize UL label up to 56′x30′
  • Overhead fire rated doors are built in accordance with requirements specified by Underwriters Laboratories Inc.

Fire-Tite fire rated shutter is also available as an interior industrial insulated doors. UL labeled oversized fire doors range from 120 sq.ft. to 783 sq.ft.

Available Classifications:
4 HR, 3 HR, 1 1/2 HR, 1 HR and 3/4 HR Underwriters’ Laboratory (UL) labels

Application Use
Fire Protection fire doors.

Bottom Bars
Industrial Coiling Shutter Bottom Bars can be Galvanized, Stainless Steel, Hot Rolled Steel, Powder Coated, Strip Seal, Pneumatic Edge, Electric Edge, Wireless Edge, Double Angle, Slide Lock.

Bracket Plates Fire Rated Doors
Bracket Plates for Fire Safe Doors can be Hot Rolled A36, Stainless Steel, Galvanized, Powder Coated, Viscous Governor, Oscillating Governor, Fire Drop Charge, Charge Wheel, Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round Bracket, Square Bracket, Hex Bracket, Single Gear Reducer, Double Gear Reducer.

Counterbalance Assembly
Counterbalance Assembly for Industrial Coiling Shutter can be Hot Rolled A36, Galvanized, Stainless Steel, Torsion Spring, Kicker, Cycle 17.5M to 400M, Collars, Welded Tabs, Tapped Holes, Lock Shaft Collar, Keyed, Bolted.

Curtain Options Fire Doors
Industrial Coiling Shutter Curtains can be Galvanized Steel, Stainless Steel, Prime Painted Galvanized, Powder Coated, Stamped Endlock, Cast Endlocks, Windlock Option, Brass End Lock.

Guide Material
Guide Material for Fire Rated Doors and Fire Safe Doors can be Hot Rolled A36, Stainless Steel, Galvanized Steel, Powder Coated, Structural Angles, Rolled Formed Angles, Chain Lock Box, Electric Interlock, Tube Mounting, Pack Out Angle.

Hood/Cover Fire Rated Doors
Industrial Coiling Shutter hood/cover can be Galvanized, Stainless Steel, Prime Painted, Powder Coated, Flame Baffle, Lintel Seal, Smoke Lintel Seal, Tension Cover, Operator Cover, Back Fascia, Round, Square, Hex, Side End Cap, Motor Cover, T.O.C. Cover, F.O.C. Cover, F.O.W. Cover.

Material Style
Metal Fire Doors and Fire Rated Shutters can be 22 Gauge, 20 Gauge, 18 Gauge.

Operation of Door
Fire Safe Doors can be Push-Up, Chain, Motor, Hand Crank, Redi-Master, Redi-Hoist, Redi-Lift, Chain Gear Reducer, Redi-Release.


Steel Raised Panel DoorsCommercial Screen Door
Is the hot weather forcing you to keep your dock doors open to ventilate your facilities and to keep your employees comfortable and working? Open dock doors invite in every bug, bird, rodent and passing stranger walking by. Unsecured doors can also lead to the loss of your valuable inventory and goods.

The proven benefit of our doors is the security aspects and helping you comply with the new federal mandates on your loading dock areas. Strong stainless steel mesh sectional doors allow you to let the fresh air in while keeping the bugs and thugs out! Screen doors keep out humans, pests, birds, wildlife, and insects by acting as a close fitting or pest-proofed barrier. The industrial overhead screen door system works in conjunction with your existing door. The #12 mesh screen door also provides you with a physical security measure helping prevent unauthorized entrance. It is lockable with the ability to be motorized. An added benefit is that ventilation from outside air helps minimize odors, fumes and vapors in your product storage and processing areas.

Federal mandates require ALL federally owned buildings must be secured including dock doors.

AIB, USDA, FDA and GFSI regulations state:

  1. Windows and doors that must be kept open for ventilation are screened to prevent pest entry.
  2. The building has barriers in place to protect against birds, rodents, insects and other pests.
  3. Metal or metal clad doors to the extent possible utilized on entrances to facility
  4. Securing doors and access restricted to authorized individuals

Overhead Loading Dock Screen Door, Providing a Bug, Wildlife, Bird, Rodent, Pest & Human Intruder Barrier

The Overhead Screen Door is added to your existing loading dock door. Using your present door’s vertical tracks, we add a switch mechanism, a second set of horizontal tracks, and a sectional screen door with stainless steel wire mesh that meets Federal Specification Standards. Our stainless steel screen mesh complies with or exceeds all food safety & food defense regulations for food plant, operations or facility applications. You can also use a track separate from the existing door.

Features:

  • Standard commercial grade hardware
  • Stainless steel wire mesh that meets Federal Specifications STD A-A_1037B .023" 12x12 mesh for security doors .011” 30x30 mesh for food applications
  • Innovative switch design allows the screen door to be used in conjunction with the existing overhead door system.
  • Torsion spring kit included
  • Aluminum frame construction
  • Widths up to 24 feet

Options:

  • Dual track installations
  • Strutting
  • Powder coating
  • Motor Operated
  • Professional installation is available and recommended by the manufacturer

Models:

  • Standard Lift
  • High Lift
  • Vertical Lift
  • Behind Rolling
  • Side Sliding

Testimonials

"Thank you, doors are nice, got several compliments."
R. Hollinger

"Thank you for the great service."
C. Houck

Read Unbiased Consumer Reviews Online at AngiesList.com

Review us on Angie's List!

We install:

General Doors
Lift Master

LiftMaster
LiftMaster
LiftMaster
LiftMaster